您好,欢迎访问济南沃顿能源科技有限公司主营变压器油的研发、生产、销售!

山东变压器油

全国服务热线

13370501966

当前位置:首页>新闻资讯>新闻动态>润滑油变稠的原因和处理方法?

润滑油变稠的原因和处理方法?

来源:https://www.jnwdsh.com/ 日期:2021-06-11 发布人:woduanshihua
用户给机器换油时,有时候会发现油变得很粘稠,这就是润滑油的粘度加大了。粘度是润滑油非常重要的指标,润滑油的粘度加大,一般是这些原因:
When users change the machine oil, they sometimes find that the oil becomes very viscous, which means that the viscosity of the lubricating oil increases. Viscosity is a very important index of lubricating oil
高温(油温≥70℃)、润滑油氧化、混入了高粘度油、油里进入积碳、油里含水乳化
High temperature (oil temperature ≥ 70 ℃), lubricating oil oxidation, mixed with high viscosity oil, carbon deposition in oil, water emulsion in oil
如果发现润滑油变稠,需要注意这些方面:
If the lubricating oil is found to be thickened, it is necessary to pay attention to these aspects:
            山东变压器油
1、注意设备运行中的温度是否过高,运行中检查油位,不能过高或者过低
1. Pay attention to whether the temperature of the equipment is too high during operation, and check the oil level during operation, not too high or too low
2、油箱的循环倍率要合理,让气泡有足够时间从油里逸出,必要时安装油箱挡板和气泡滤网
2. The circulation rate of the oil tank should be reasonable to allow enough time for bubbles to escape from the oil. If necessary, install the oil tank baffle and bubble filter
3、缩短换油周期
3. Shorten oil change cycle
4、避免油里进水和其它杂质
4. Avoid water and other impurities in the oil