您好,欢迎访问济南沃顿能源科技有限公司主营变压器油的研发、生产、销售!

山东变压器油

全国服务热线

13370501966

当前位置:首页>新闻资讯>新闻动态>变压器渗漏油应怎样处理?

变压器渗漏油应怎样处理?

来源:https://www.jnwdsh.com/ 日期:2020-08-11 发布人:woduanshihua
  变压器渗漏油巧处理我公司一座变电站的主变压器散热片焊接部位多处出现渗漏油现象,虽经生产厂家几次焊接,均为得到彻底治理。后经过我们多次试验,在不停电的情况下,采用改性丙烯酸酯胶粘剂对渗漏点进行处理,取得了良好的效果。山东变压器油厂家现将具体做法介绍如下。
  How to deal with the oil leakage of transformer skillfully the welding parts of the heat sink of the main transformer in a substation of our company have oil leakage phenomenon. Although the manufacturer has welded it several times, it has been completely treated. After many tests, we use modified acrylate adhesive to treat the leakage point without power failure, and good results have been achieved. Shandong transformer oil factory will now introduce the specific practice as follows.
  1使用改性丙烯酸酯胶粘剂处理渗漏的好处使用改性丙烯酸酯胶粘剂处理注油设备的渗漏问题,操作简单方便,易学易掌握。避免了高温焊接引起变压器油燃烧的危险,避免高温导致变压器油质碳化的可能性,而且可以做到不停电处理,保证了供电可靠性。
  1. The advantages of using modified acrylate adhesive to deal with leakage of oil filling equipment is easy to operate, easy to learn and master. It can avoid the danger of transformer oil burning caused by high temperature welding, avoid the possibility of transformer oil carbonization caused by high temperature, and can be treated without power failure, so as to ensure the reliability of power supply.
             山东变压器油
  2使用改性丙烯酸酯胶粘剂处理渗漏的要点A首先,用洗洁精或洗衣粉,对渗漏油进行清洗,擦干后用粗砂布除去渗漏处的油漆,再用细砂布进一步打磨,使渗漏处平整、光滑、整洁、无污迹。如果渗漏时间较长、沉积油泥较多,可先用刀片除去油泥,再用洗洁精清洗,用布擦干,用砂纸打磨。如果清洗后发现渗油严重(每分钟渗油大于10滴),可把改性丙烯酸酯胶粘剂调匀后直接涂在缝隙处,先止住油渗漏,再用工具把涂上的胶刮平,然后再清洗、打磨。以上这一阶段称作打底。B打底后,将改性丙烯酸酯胶粘剂调均匀涂在打底面上,停1分钟不粘手时再用手均匀地挤压胶粘剂,使胶有效进入缝隙中,堵塞渗油点。C处理后,观察一个月,渗漏处不再有油渍,再喷上防锈漆。察一个月,渗漏处不再有油渍,再喷上防锈漆。
  2. The key points of using modified acrylate adhesive to deal with leakage a: firstly, use detergent or washing powder to clean the leaking oil. After drying, use coarse abrasive cloth to remove the paint at the leakage, and then use fine abrasive cloth to further polish the leakage to make the leakage flat, smooth, clean and free of stains. If the leakage time is longer and more sludge is deposited, the oil sludge can be removed with a blade, cleaned with detergent, dried with cloth and polished with sandpaper. If serious oil leakage is found after cleaning (more than 10 drops per minute), the modified acrylate adhesive can be mixed and directly applied to the gap. First stop the oil leakage, and then use tools to scrape the coated glue, and then clean and polish. The above stage is called bottoming. B. after priming, the modified acrylate adhesive is evenly mixed and applied on the backing surface. When the adhesive does not stick for 1 minute, the adhesive is evenly squeezed by hand to make the adhesive enter the gap effectively and block the oil leakage point. C treatment, observation for a month, leakage no longer oil stains, and then spray anti rust paint. Check for a month, there is no oil stain on the leakage, and then spray anti rust paint.
  以上是有关变压器渗漏油应怎样处理的做法详解,希望对大家有所收获,想要了解更多相关知识,欢迎点击我们的山东变压器油https://www.jnwdsh.com官网。
  The above is about how to deal with transformer oil leakage in detail. I hope you can get something. If you want to know more about it, please click our transformer oil in Shandong https://www.jnwdsh.com Official website.
 

咨询热线:13370501966

官方网址:www.jnwdsh.com

地址:济南市长清区文昌办事处南王村村北

微信二维码

微信二维码