欢迎访问:济南沃顿石油化工有限公司!
一键分享网站到:
服务热线
13370501966
网站首页
公司简介
产品中心
新闻动态
生产设施
在线留言
联系我们
咨询热线 13370501966

新闻动态

当前位置:首页-新闻动态
不同油基的油相混合的细节

储存油罐宜用不锈钢或铝合金等耐蚀金属制成,存储油罐应保持不渗漏。当采用全密封储存时,空腔内最好充氮气;当采用吸湿剂防潮时,应定期更换吸湿剂。
The storage tank should be made of corrosion resistant metal such as stainless steel or aluminum alloy, and the storage tank should be kept from leakage. When all sealed storage is used, it is best to fill the cavity in the cavity. When the moisture absorption agent is used to prevent moisture, the moisture absorption agent should be replaced regularly.
用油桶储存少量的油,宜放在户内。如果在户外放置,则应该将每个油桶竖立倾斜,使桶盖位于油桶的最上方,并用防雨布盖住,以免下雨时水分从桶盖盖处进入油中。
Store a small amount of oil in an oil tank and put it in a household. If placed outdoors, it should be erected to cover each drum tilt, most located above the barrel, and the rain cover, to avoid rain water from the barrel cover into the oil.
此外很多细节均需注意:
In addition, a lot of details should be paid attention to:
1.不同油基的油不可装入一个油罐中。一般不同油基的油相混合应规定比例限制(只允许少量混合),而且要经过认真的相容性试验。
1. oil of different oil base can not be loaded into an oil tank. The mixture of oil phases in the general oil base should be limited in proportion (only a small amount of mixing is allowed), and a serious compatibility test should be carried out.
山东变压器油
2.油的储存罐是加盖封闭的,防止水及灰尘的落入,如果是较长时间的储存,为防止油表面与空气的长期接触而加速老化,应采用真空储存或在油面上充以干燥的氮气。
2., the storage tank of oil is covered and closed to prevent water and dust falling. If it is stored for a long time, to prevent aging of oil surface and air for a long time, it should be stored in vacuum or filled with dry nitrogen on the oil surface.
3.输送油的管路系统应当保持良好的密封性,防止在油的输送过程中混入空气,形成气泡。另一方面也可防止油的渗漏,造成损失和不安全因素。
3. the pipeline system of oil delivery should keep good sealing, prevent the mixing of air in the process of oil transportation, and form bubbles. On the other hand, it can also prevent oil leakage, causing loss and unsafe factors.
4.油处理设备中的加油器,最好采用蒸气加热管(比电加热器温度匀,要主要的是安全,无引起火花的可能)。加热管应浸没于油中,一定要先注入油而通蒸汽加热。不可先通蒸汽后注油,这主要是避免油与温度高的加热器接触。
4. oil treatment equipment in the refueling device, the best use of steam heating tube (more than the electric heater temperature, the main is safe, no spark possibility). The heating pipe should be immersed in the oil and must be injected into the oil first and heat through the steam. Oil can not be injected after steam, which is mainly to avoid contact between oil and high temperature heater.
5.注意油泵(齿轮泵和离心泵)的运行状态。避免金属部件的刮,擦而出现金属粉末,使用潜油泵时还应注意电机线圈的联接,接触。勿使有接触不良现象。
5. pay attention to the operating state of the oil pump (gear pump and centrifugal pump). Avoid metal parts scraping, rubbing and appear metal powder. When using the submersible pump, we should pay attention to the connection and contact of the motor coil. Do not make a bad contact.
以上便是山东变压器油今天的分享,您还满意吗,欢迎关注我们的网站:http://www.jnwdsh.com并且关注我们的产品,我们将为您提供优良的产品,衷心的愿与您建立合作关系
The above is today's sharing of Shandong transformer oil. Are you satisfied? Welcome to our website: http://www.jnwdsh.com and pay attention to our products. We will provide you with excellent products and sincerely cooperate with you.
网站首页 公司简介 产品中心 新闻动态 生产设施 在线留言 联系我们
contact us 联系我们
地址 济南市长清区文昌办事处南王村村北
LANDLINE 13370501966
QR code 关注我们
二维码 拿出手机扫一扫